For 1990-2009 cars only
- Inspect the forward sprag assembly (642) for the following conditions:
- Inspect the forward clutch outer race (644) for the following conditions:
- Install the forward sprag assembly (642) into the forward clutch outer race (644).
- Inspect the sprag assembly retainer rings (643) for wear or damage.
- Install the sprag assembly retainer rings (643) into the forward clutch sprag assembly (644).
- Inspect the forward sprag clutch inner race and input sun gear assembly (640) for the following conditions:
- Install the forward sprag clutch inner race and input sun gear assembly (640) into the forward sprag and outer race assembly.
- Inspect the overrun clutch hub (639) for the following conditions:
- Install the overrun clutch hub (639) onto the sprag clutch inner race and input sun gear assembly (640).
- Install the overrun clutch hub retaining snap ring (638).
- Test the forward clutch sprag assembly for proper operation.
- Install the forward clutch sprag and input sun gear assembly into the input clutch housing.
- Index the overrun clutch hub into the overrun clutch plates.
| • | Wear or damage |
| • | Weak or broken springs |
| • | Race wear or damage |
| • | Spline wear |
| • | Surface finish damage |
| • | Damaged spline or gear teeth |
| • | Ring groove damage |
| • | Surface finish damage |
| • | Loose retainer |
| • | Wear |
| • | Cracks |
| • | Spline damage |
| • | Plugged lubrication holes |
| • | Damaged tangs |
| • | Cracks |
Important: If the forward clutch sprag assembly operates backward, you have installed the sprag backward. Reassemble the sprag correctly.
| 11.1. | Position the forward clutch sprag assembly with the input sun gear facing up. |
| Important: The sun gear should only rotate in a counterclockwise direction. |
| 11.2. | Hold the forward sprag clutch outer race (644) with one hand and rotate the input sun gear (640) with the other hand. |
