Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the heated mirror circuit description and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms |
2 | Verify that the heated mirrors are inoperative. Do the heated mirrors operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Is the HTDMIR fuse in the underhood fuse block blown? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair the short to ground in CKT 2267 (ORN). Did you complete the repair? | -- | Go to Step 12 | -- |
5 | Are both mirrors inoperative? | -- | Go to Step 6 | Go to Step 7 |
6 | Repair the open in CKT 2267 (ORN) between connector C501 terminal A8 (4 door) or C500 terminal P (2 door) and the underhood fuse block. Did you complete the repair? | -- | Go to Step 12 | -- |
7 |
Does the voltage measure near the specified value? | B+ | Go to Step 8 | Go to Step 9 |
8 | Connect the J 39200 DMM between CKT 2267 (ORN) at cavity A and CKT 1850 (BLK) at cavity H of the appropriate outside rear view mirror connector. Does the voltage measure near the specified value? | B+ | Go to Step 11 | Go to Step 10 |
9 | Locate and repair the open in CKT 2267 (ORN) between the outside rear view mirror and connector C500 (2 door) or C501 (4 door). Did you complete the repair? | -- | Go to Step 12 | -- |
10 | Locate and repair the open in CKT 1850 (BLK) at the LH outside rear view mirror and G202 or CKT 1050 (BLK) at the RH outside rear view mirror and G205. Did you complete the repair? | -- | Go to Step 12 | -- |
11 | Replace the appropriate rear view mirror. Did you complete the repair? | -- | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you find and correct the condition? | -- | System OK | Go to Step 3 |
