Did you perform the Power Door Systems Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Power Door Systems

Verify that the RR power window is inoperative from the LF switch.

Do the power windows operate normally?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Access the left door lock and side window switch.
2. Turn the ignition switch to the RUN position.
3. Connect a digital multimeter (DMM) to CKT 170 (LT GRN), terminal H at the left door lock and window switch connector C2 and CKT 171 (PPL), terminal H at the left door lock and window switch connector C1.
4. Operate the right rear window at the left door lock and side window switch in the UP/DOWN position.
5. Test for voltage. Refer to Measuring Voltage in wiring systems.

Is battery voltage present?

B+

Go to Step 4

Go to Step 6

Inspect for a poor connection at the left door lock and side window switch.

Are the connections OK?

--

Go to Step 6

Go to Step 5

Repair the connections as necessary.

Is the repair complete?

--

Go to Step 7

--

Replace the left door lock and side window switch. Refer to Front Side Door Window Switch Replacement in doors.

Is the repair complete?

--

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3