GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 S10 Pickup - 4WD 🢒 Body and Accessories 🢒 Doors 🢒 Outside Rearview Mirror Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .

    2. Object Number: 294413 Size: SH
  2. Remove the access hole plugs.
  3. Remove the nuts that retain the outside rearview mirror to the door.

    4. Object Number: 294414 Size: SH
  4. Remove the outside rearview mirror from the door.
  5. Disconnect the electrical connector, if equipped.

Installation Procedure

    Object Number: 294414 Size: SH
  1. Connect the electrical connector, if equipped.
  2. Install the outside rearview mirror to the door.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the nuts that retain the outside rearview mirror to the door.

    4. Tighten
    Tighten the nuts to 6 N·m (53 lb in).


    Object Number: 294413 Size: SH
  4. Install the access hole plugs.
  5. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .