GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 S10 Pickup - 4WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Hazard and Turn Signal Flasher Replacement

Removal Procedure

    Object Number: 677007 Size: SH
  1. Open the glove box to expose the glove box retaining tab (1).
  2. Lift the retaining tab and allow the glove box to hang freely.

    3. Object Number: 677004 Size: SH
  3. Using a suitable flat-bladed tool, release the plastic retainer that retains the hazard/ turn signal flasher (1) to the C203 body harness connector (2) .
  4. Remove the hazard/ turn signal flasher (1).

Installation Procedure

    Object Number: 677004 Size: SH
  1. Install the hazard/ turn signal flasher (1) to the C203 body harness connector (2).
  2. Install the plastic retainer and ensure the hazard/ turn signal flasher will not work its way loose over time.

    3. Object Number: 677007 Size: SH
  3. Lift the glove box retaining tab (1) to install the glove box to its original position.
  4. Close the glove box.