Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |||||
2 | Verify that the inside rearview mirror lamps are inoperative. Do the inside rearview mirror lamps operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 | ||||
3 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 4 | ||||
4 | Locate and repair the open or high resistance in CKT 1732 (ORN). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 10 | -- | ||||
5 |
Does the test lamp illuminate? | -- | Go to Step 7 | Go to Step 6 | ||||
6 | Locate and repair the open or high resistance in CKT 156 (WHT). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 10 | -- | ||||
7 | Connect a test lamp between the following cavities. Refer to Circuit Testing in Wiring Systems.
Does the test lamp illuminate? | -- | Go to Step 9 | Go to Step 8 | ||||
8 | Locate and repair an open or high resistance in CKT 1850 (BLK). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 10 | -- | ||||
9 | Replace the inside rearview mirror lamp. Refer to Rearview Mirror Lamp Replacement . Is the repair complete? | -- | Go to Step 10 | -- | ||||
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
