Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Relay Block | LH of the dash, right of the IP fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Body Control Module (BCM) Connector C2, Blue (24 Cavities) | Lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | Body Control System Connector End Views in Body Control System |
Data Link Connector (DLC) | Lower LH of the IP | Data Link Communications Component Views in Data Link Communications | Data Link Communications Connector End Views in Data Link Communications |
Four Wheel Drive Indicator Switch | At the front axle, RH of the differential | ||
Front Drive Axle Clutch Solenoid | On the cowl, 16.5 cm (6.50 in) from the breakout to the windshield wiper motor | ||
Instrument Cluster | In the IP, ahead of the steering column | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
IP Fuse Block | LH of the IP, near the door jamb switch, LF | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Transfer Case Encoder Motor C1 (4 Cavities) | RH of the ATC, below the rear transfer case speed sensor connector | ||
Transfer Case Encoder Motor C2 (6 Cavities) | Top of transfer case, left side | ||
Transfer Case Front Propshaft Speed Sensor | Top LH rear of the transfer case | ||
Transfer Case Rear Propshaft Speed Sensor | Top RH rear of the transfer case, near the rear propshaft | ||
Transfer Case Shift Control Module Connector C1 (32 Cavities) | Behind RH front kick panel, the lower connector | ||
Transfer Case Shift Control Module Connector C2 (4 Cavities) | Behind RH front kick panel, the upper connector | ||
Transfer Case Shift Control Switch Connector C1 (8 Cavities) | Right of the instrument panel cluster | ||
Transfer Case Shift Control Switch Connector C2 (4 Cavities) | Right of the instrument panel cluster | ||
Underhood Fuse Block | On the top of the left inner wheelwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) (Body) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) (Engine) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) (4.3L Engine) | RH of the engine compartment | Engine Controls Component Views in Engine Controls - 4.3L | -- |
Vehicle Control Module (VCM) Connector C4 (24 Cavities) | RH of the engine compartment | Engine Controls Component Views in Engine Controls - 4.3L | Engine Controls Connector End Views in Engine Controls - 4.3L |
C108 (16 Cavities) | Transfer case extension harness to body harness, LH rear engine compartment near cowl penetration P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C114 (2 Cavities) | Body harness to transfer case shift control harness, LH rear engine compartment near cowl penetration P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 (116 Cavities) | Body harness to IP harness, to the RH of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G103 | (CKT 351) Engine harness, RH rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G105 | (CKT 450, CKT 451) Engine harness, LH Rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G117 | (CKT 850) Body harness, to the LH rear of the engine compartment, near the cruise control module | Harness Routing Views in Wiring Systems | -- |
G203 | (CKT 1050) Body harness, to the RH of the IP, between C203 and the splice packs | Harness Routing Views in Wiring Systems | -- |
G204 | (CKT 1050) Body harness, to the RH of the IP, between C203 and the splice packs | Harness Routing Views in Wiring Systems | -- |
G205 | (CKT 1050) Body harness, to the RH of the IP, between C203 and the splice packs | Harness Routing Views in Wiring Systems | -- |
P100 | IP bulkhead pass-through, LH rear of the engine compartment, on the cowl | Harness Routing Views in Wiring Systems | -- |
S106 | (CKT 351) Engine harness, between the breakouts to the rear heated oxygen sensors connector and the body harness connector, 7 cm (2.76 in) from the breakout to the heated oxygen sensor connector | Harness Routing Views in Wiring Systems | -- |
S118 | (CKT 850) Body harness, between the breakouts to the blower motor and the blower motor relay | Harness Routing Views in Wiring Systems | -- |
S134 | (CKT 850) Auto 4WD extension harness, in the breakout to the front VSS, 10 cm (3.94 in) into the breakout | Harness Routing Views in Wiring Systems | -- |
S152 | (CKT 351, CKT 413, CKT 451) Engine harness, between the breakouts for the LH rear and RH rear engine block grounds, 15 cm (5.9 in) from the breakout to the LH rear engine grounds | Harness Routing Views in Wiring Systems | -- |
S205 | (CKT 1220) IP harness, between the breakouts for the radio and BCM connector C3, 8 cm (3.15 in) from the breakout to the radio | Harness Routing Views in Wiring Systems | -- |
S282 (4WD Base Pickup Only) | (CKT 1382) IP harness, between the breakouts to the BCM connector C3 and the stereo radio, 6 cm (2.36 in) from the breakout to the BCM | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP200 | (CKT 41, CKT 241, CKT 341, CKT 817) Strapped to the body harness, in the center front of the IP, to the RH of SP204 | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP201 | Body harness, to the LH of the IP, below the IP fuse block, taped to the body harness | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP203 | (CKT 1050) IP harness, on the IP, in front of the ashtray, strapped to the body harness | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP204 | (CKT 584, CKT 1414, CKT 1415, CKT 1050) Strapped to the body harness, in the center front of the IP, to the LH of SP200 | Harness Routing Views in Wiring Systems | -- |
