GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 S10 Pickup - 2WD 🢒 Transmission/Transaxle 🢒 Manual Transmission - NV 3500 🢒 Vehicle Speed Sensor

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 102878 Size: SH
  2. Disconnect the electrical connector from the vehicle speed sensor.

    3. Object Number: 761481 Size: SH
  3. Remove the following parts:
    4. • The vehicle speed sensor
    • The O-ring seal

Installation Procedure
  1. Coat a new O-ring seal with a thin film of transmission oil.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 761481 Size: SH
  2. Install the following parts:
    3. 2.1. The O-ring on the vehicle speed sensor assembly.
    2.2. The vehicle speed sensor assembly.

    Tighten
    Tighten the bolt to 16 N·m (12 lb ft).


    Object Number: 102878 Size: SH
  3. Install the electrical connector to the vehicle speed sensor.
  4. Lower the vehicle.