NEW 3-4 CLUTCH PLATES (STEEL) HYDRA-MATIC 4L60 TRANSMISSION

TRANSMISSION APPLICATIONS: 4L60

TRANSMISSION MODELS:

SUBJECT: NEW 3-4 CLUTCH PLATES (STEEL)

VEHICLE APPLICATIONS: 1987-91 B,D,F,Y CARS: G,L,M VANS: C/K,R/V,S/T TRUCKS

New 3-4 clutch plates (steel) are available from 1987-1990 HYDRA- MATIC 4L60 transmissions. The new clutch plates have a slightly smaller outer radius to let them move more freely in the clutch housing.

DATE OF PRODUCTION CHANGE:

Beginning July 27,1990 (Julian Date 208), all HYDRA-MATIC 4L60 transmissions were built using the new 3-4 clutch plates.

SERVICE INFORMATION:

The new 3-4 clutch plates can be used to service any HYDRA-MATIC 4L60 transmission produced after February 9,1987 (Julian Date 040).

SERVICE PARTS INFORMATION:

Description New Part# ---------------------------------- ---------- Plate - 3rd and 4th (steel - 4 or 5 needed) 8678053 Plate - 3rd and 4th (steel - 1 needed) 8678054

SERVICE MANUAL REFERENCE:

Refer to the Automatic Transmission Unit Repair Section of the appropriate Service Manual for 3-4 clutch plate removal and installation information.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.