For 1990-2009 cars only
Removal Procedure
- Release the parking brake.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the rear tire and wheel assembly from the vehicle. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Remove the drum.
- If the drum does not remove easily, then complete the following steps:
- If the drum is rusted or corroded to the hub and the backing plate, then complete the following steps:
- Inspect the drum. Refinish or replace as necessary. Refer to Brake Drum Surface and Wear Inspection .
- Inspect the brake shoes and the drum brake components. Replace parts as necessary.
| 5.1. | Remove the rear brake adjuster access hole plug. |
| 5.2. | Insert a screwdriver through the hole in the backing plate. Hold the brake shoe adjuster actuator away from the park brake lever strut. |
| 5.3. | Reduce the brake shoe adjustment by turning the park brake lever strut with another screwdriver. |
| 5.4. | Remove the drum. |
| 6.1. | Insert 2 bolts in the 2 holes of the drum. |
| 6.2. | Turn the 2 bolts at the same time in the clockwise direction in order to loosen the drum from the backing plate. |
| 6.3. | Remove the drum. |
Installation Procedure
- Install the drum.
- Install the tire and wheel assembly to the vehicle. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
- Lower the vehicle.
