System Description
When an E85 compatible vehicle is built, an ECM or PCM replaced, or when the learned alcohol content has been reset with a scan tool the fuel system will need to contain ASTM gasoline with 10 percent or less ethanol content. If the fuel in the fuel system needs to be drained and replaced with ASTM gasoline, the engine will need to run at operating temperature and consume at least 1 liter of fuel before the system will recognize the correct alcohol content. Either ASTM gasoline or ASTM E85 fuel can then be used
Step | Action | Values | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check - Vehicle? | -- | Go to Step 2 | |
2 |
Is the difference between the measured ethanol content and the scan tool fuel alcohol content more than the specified value? | 15% | Go to Step 3 | Go to Step 7 |
3 | Is the measured ethanol content less than the specified value? | 15% | Go to Step 5 | Go to Step 4 |
4 |
Is the measured ethanol content more than the specified value? | 15% | -- | Go to Step 5 |
5 | Use the scan tool to reset the learned fuel composition to the specified value. Is the action complete? | 3% | Go to Step 6 | -- |
6 | Use the scan tool reset the fuel trim values. Is the action complete? | -- | Go to Step 7 | -- |
7 | Observe the Capture Info with a scan tool. Are there any DTCs that have not been diagnosed? | -- | System OK |
