GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Monte Carlo 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Mass Airflow Sensor with Intake Air Temperature Sensor Replacement

Removal Procedure

    Object Number: 1608290 Size: SH
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (3).

    3. Object Number: 1556017 Size: SH
  3. Remove the MAF/IAT sensor bolts.
  4. Remove the MAF/IAT sensor from the air cleaner housing.
  5. Remove the MAF/IAT sensor seal, if necessary.

Installation Procedure

    Object Number: 1556017 Size: SH
  1. Install the MAF/IAT sensor seal, if necessary.
  2. Install the MAF/IAT sensor to the air cleaner housing.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the MAF/IAT sensor bolts.

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 1608290 Size: SH
  4. Connect the MAF/IAT sensor electrical connector (3).
  5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .