For 1990-2009 cars only
Removal Procedure
- Remove the front seats. Refer to Split Bench Seat Replacement or to Front Seat Replacement - Bucket in Seats:
- Remove the front floor center console, if equipped. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.
- Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
- Remove the carpet retainers. Refer to Front Carpet Retainer Replacement and to Rear Carpet Retainer Replacement .
- For the Impala, remove the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
- Remove the rear lower quarter trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
- Remove the carpet from the vehicle.
Installation Procedure
- Install the carpet into the vehicle.
- Install the rear quarter lower trim. Refer to Rear Quarter Lower Trim Panel Replacement .
- For the Impala, install the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
- Install the carpet retainers. Refer to Front Carpet Retainer Replacement and to Rear Carpet Retainer Replacement .
- Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
- Install the front floor center console, if equipped. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console.
- Install the front seats. Refer to Split Bench Seat Replacement or to Front Seat Replacement - Bucket in Seats:
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.
Reach under the carpet and feed the power seat adjusters, vacuum connector and seat belt warning wire connector through the slits in the carpet where required.
