For 1990-2009 cars only
SMU - Revised Brake Rotor Specifications
| Subject: | Revised Brake Rotor Specifications |
| Models: | 1997-2000 Buick Century, Regal |
| 2000 Chevrolet Impala, Monte Carlo |
| 1998-2000 Oldsmobile Intrigue |
| 1997-2000 Pontiac Grand Prix |
This bulletin is being issued to revise the front and rear brake rotor minimum allowable thickness after refinish specification in the Disc Brakes sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Application | Specification | |
|---|---|---|
Metric | English | |
Front Brake Rotor Minimum Allowable Thickness After Refinish | 31.08 mm | 1.22 in |
Rear Brake Rotor Minimum Allowable Thickness After Refinish | 10.0 mm | 0.39 in |
