GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 614333  Size: SH

    Important: You must perform the new body control module (BCM) setup when replacing the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration .

  1. Disconnect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Remove the left instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gages and Console.
  3. Disconnect the BCM electrical connectors (2, 3, 4).
  4. Remove the BCM (1).

Installation Procedure


    Object Number: 614333  Size: SH
  1. Install the body control module (BCM) (1).
  2. Connect the BCM electrical connectors (2, 3, 4).
  3. Install the left instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gages and Console.
  4. Connect the battery ground (negative) cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  5. Perform the new BCM setup. Refer to Body Control Module (BCM) Programming/RPO Configuration .