Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 | Inspect for an open wiper/washer fuse. Is the fuse open? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the wiper/washer fuse. Is the replacement complete? | -- | -- | |
4 |
Is the test light on? | -- | Go to Step 6 | Go to Step 5 |
5 | Repair the open or poor connection in CKT 243. Is the repair complete? | -- | -- | |
6 |
Is the test light on? | -- | Go to Step 8 | Go to Step 7 |
7 | Repair the open in CKT 1050. Is the repair complete? | -- | -- | |
8 |
Is the test light on? | -- | Go to Step 12 | Go to Step 9 |
9 | Inspect for a poor connection or an open in CKT 95. Is a poor connection or an open present? | -- | Go to Step 10 | Go to Step 11 |
10 | Repair the poor connection or open in CKT 95. Is the repair complete? | -- | -- | |
11 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column -Tilt. Is the replacement complete? | -- | -- | |
12 |
Is the test light on? | -- | Go to Step 15 | Go to Step 13 |
13 | Inspect for a poor connection or an open in CKT 91. Is a poor connection or an open present? | -- | Go to Step 14 | Go to Step 11 |
14 | Repair the poor connection or open in CKT 91. Is the repair complete? | -- | -- | |
15 | Inspect for continuity between wiper motor connector C1, terminal A, and connector C2, terminal B. Is continuity present? | -- | Go to Step 16 | Go to Step 19 |
16 | Inspect for a poor connection at wiper motor connectors C1 and C2. Is a poor connection present? | -- | Go to Step 18 | Go to Step 17 |
17 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Is the replacement complete? | -- | -- | |
18 | Repair the poor connection. Is the repair complete? | -- | -- | |
19 | Repair the open in CKT 196. Is the repair complete? | -- | -- |
