Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Is the odometer showing TRIP? | -- | Go to Step 2 | Go to Step 7 |
2 | Disconnect the accessory switch harness connector. Does the odometer still show TRIP? | -- | Go to Step 3 | Go to Step 6 |
3 | Inspect for a short to ground on CKT 717. Does a short to ground exist in CKT 717? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair the short to ground in CKT 717. Is the repair complete? | -- | System OK | -- |
5 | Repair the instrument cluster. Refer to Instrument Cluster Replacement . Is the repair complete? | -- | System OK | -- |
6 | Replace the accessory switch. Refer to Accessory Switch Replacement . Is the repair complete? | -- | System OK | -- |
7 |
Does the odometer display still show TRIP? | -- | Go to Step 8 | Go to Step 10 |
8 | Inspect the system for a poor connection or an open in CKT 717. Does a poor connection or an open exist in CKT 717? | -- | Go to Step 9 | Go to Step 5 |
9 | Repair a poor connection or an open in CKT 717? Is the repair complete? | -- | System OK | -- |
10 | Inspect for a poor connection or an open in CKT 1550 between the accessory switch harness connector terminal E and G201. Did you find a poor connection or an open in CKT 1550 between the accessory switch harness connector terminal E and G201? | -- | Go to Step 11 | Go to Step 6 |
11 | Repair a poor connection or an open in CKT 1550 between the accessory switch harness connector terminal E and G201. Is the repair? | -- | System OK | -- |
