GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu Classic 🢒 Preface 🢒 Cautions and Notices 🢒 Accelerator Pedal Bracket Replacement

Removal Procedure
  1. Remove the accelerator pedal from the vehicle. Refer to Accelerator Pedal Assembly Replacement .
  2. Remove the adjustable brake pedal cable. Refer to Brake Pedal Adjuster Actuator Cable Replacement .

    3. Object Number: 1241586 Size: SH
  3. Remove the 3 nuts that attach the adjustable accelerator bracket to the cowl.
  4. Remove the adjustable accelerator bracket from the vehicle.

Installation Procedure

    Object Number: 1241586 Size: SH
  1. Install the adjustable accelerator bracket to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the 3 adjustable accelerator bracket nuts.

    3. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

    Important: Ensure that the adjustable accelerator pedal and adjustable brake pedal are synchronized in the full rearward position.

  3. Install the NEW cable. Refer to Brake Pedal Adjuster Actuator Cable Replacement .
  4. Install the accelerator pedal to the vehicle. Refer to Accelerator Pedal Assembly Replacement .
  5. Calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration .