1

Front Seat Lumbar Support Actuator Lever

2

Front Seat Side Inflatable Restraint Module Bezel

Procedure

1. Take special care when removing the trim. Start at the arched portion, and work counterclockwise around the trim, ending at the upper most point.
2. To disengaged the upper most clip, pivot the trim forward.
3. When installing the trim, it is important to start at the upper most point and engage that clip to the back panel first, and then continue working around the bezel counterclockwise.

3

Front Seat Back Cushion Panel

Procedure

1. Starting at the top of the seat back panel, remove the push-in retainers by pulling the panel from the seat back frame.
2. Remove the seat back panel from the seat back frame by pulling straight up to release the lower hooks.