GM Service Manual Online
For 1990-2009 cars only

Air Conditioning Compressor Replacement LZ4, LZE


Object Number: 2003684  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
  2. Remove the drive belt. Refer to Drive Belt Replacement.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  4. Remove the right front fender liner. Refer to Front Wheelhouse Panel Splash Shield Replacement.
  5. Disconnect the electrical connector.

1

A/C Compressor Hose Nut

Caution: Refer to Fastener Caution in the Preface section.

Tip
Remove the A/C compressor hose from the A/C compressor and cap hose.

Tighten
20 N·m (15 lb ft)

2

Sealing Washer

Tip
Remove and discard sealing washers. Refer to Sealing Washer Replacement.

3

A/C Compressor Nut

Tip
Tighten in sequence with A/C compressor mounting bolts.

Tighten
50 N·m (37 lb ft)

4

A/C Compressor Bolt

Tip
Tighten the A/C compressor mounting bolts and nut in sequence.

Tighten
50 N·m (37 lb ft)

5

A/C Compressor Assembly

Procedure

  1. Removal of oil filter and repositioning of the front exhaust pipe may be necessary to ease in compressor replacement.
  2. Use a low viscosity, poly-alkylene glycol (PAG) oil. Use of the incorrect oil can result in compressor failure.
  3. When replacing the A/C compressor, balance the compressor. Refer to Air Conditioning Compressor Oil Balancing.
  4. Using J 39400 , leak test A/C compressor fittings.

Air Conditioning Compressor Replacement LAT


Object Number: 1841791  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
  2. Remove the drive belt. Refer to Drive Belt Replacement.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  4. Remove the right engine splash shield. Refer to Engine Splash Shield Replacement - Right Side.
  5. Remove drive belt tensioner. Refer to Drive Belt Tensioner Replacement.
  6. Disconnect the A/C compressor electrical connector.
  7. Remove compressor hose assembly. Refer to Air Conditioning Compressor and Condenser Hose Replacement.

1

A/C Compressor Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tip
Tighten the A/C compressor mounting bolts in sequence shown in graphic.

Tighten
50 N·m (37 lb ft)

2

A/C Compressor Assembly

Procedure

  1. Use a low viscosity, poly-alkylene glycol (PAG) oil. Use of the incorrect oil can result in compressor failure.
  2. When replacing the A/C compressor, balance the compressor oil. Refer to Air Conditioning Compressor Oil Balancing.
  3. Using J 39400 leak test A/C compressor fittings.

Special Tools

J-39400 Electronic Halogen Leak Detector

Air Conditioning Compressor Replacement LE5


Object Number: 2003683  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
  2. Remove the drive belt. Refer to Drive Belt Replacement.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  4. Disconnect the electrical connector.

1

A/C Compressor Hose Nut

Caution: Refer to Fastener Caution in the Preface section.

Tip
Remove the A/C compressor hose from the A/C compressor and cap hose.

Tighten
20 N·m (15 lb ft)

2

Sealing Washer

Tip
Remove and discard sealing washers. Refer to Sealing Washer Replacement.

3

A/C Compressor Mounting Fasteners

Tip
Tighten the A/C compressor mounting fasteners in sequence.

Tighten
22 N·m (16 lb ft)

4

A/C Compressor Assembly

Procedure

  1. Use a low viscosity, poly-alkylene glycol (PAG) oil. Use of the incorrect oil can result in compressor failure.
  2. When replacing the A/C compressor, balance the compressor. Refer to Air Conditioning Compressor Oil Balancing.
  3. Using J 39400 leak test A/C compressor fittings.

Special Tools

J-39400 Electronic Halogen Leak Detector

Air Conditioning Compressor Replacement LY7


Object Number: 1772425  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
  2. Remove the drive belt. Refer to Drive Belt Replacement.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  4. Remove the right front fender liner. Refer to Front Wheelhouse Panel Splash Shield Replacement.
  5. Remove the right side engine splash shield. Refer to Engine Splash Shield Replacement - Right Side
  6. Disconnect the A/C compressor electrical connector.

1

A/C Compressor Hose Nut

Caution: Refer to Fastener Caution in the Preface section.

Tip
Remove the A/C compressor hose from the A/C compressor and cap hose.

Tighten
20 N·m (15 lb ft)

2

Sealing Washer (Qty: 2)

Tip
Remove and discard sealing washers. Refer to Sealing Washer Replacement.

3

A/C Compressor Nut

Tip
Tighten the A/C compressor mounting bolts and nut in sequence.

Tighten
50 N·m (37 lb ft)

4

A/C Compressor Bolt (Qty: 2)

Tighten
50 N·m (37 lb ft)

5

A/C Compressor Assembly

Procedure

  1. Use a low viscosity, poly-alkylene glycol (PAG) oil. Use of the incorrect oil can result in compressor failure.
  2. When replacing the A/C compressor, balance the compressor. Refer to Air Conditioning Compressor Oil Balancing.
  3. Using J 39400 leak test A/C compressor fittings.

Special Tools

J-39400 Electronic Halogen Leak Detector