GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Warning: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

  2. Object Number: 1998677  Size: SH
  3. Remove the front transaxle mount through bolt nut (1).
  4. Remove the front transaxle mount through bolt (2).

  5. Object Number: 1998678  Size: SH
  6. Remove the transaxle mount-to-transaxle attachment bolts (2).
  7. Remove the transaxle mount (1) from the vehicle.

Installation Procedure


    Object Number: 1998678  Size: SH
  1. Install the transaxle mount (1).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the transaxle mount bolts (2) and tighten to 50 N·m (37 lb ft).

  4. Object Number: 1998677  Size: SH
  5. Install the transaxle mount through bolt (2).
  6. Install the transaxle mount through bolt nut (1) and tighten to 90 N·m (66 lb ft).
  7. Lower the vehicle.