Digital Radio Receiver Replacement. Chevrolet Malibu 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Digital Radio Receiver Replacement

Callout	Component Name
Preliminary Procedures Remove the rear widow shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement. Program the digital radio receiver after replacement. Refer to Control Module References.
1	Digital Radio Receiver Assembly Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 3 N·m (26 lb in)
2	Procedure Disconnect electrical connections. Transfer parts as required. Tip Do not interchange digital radio receivers between vehicles. Interchanging digital receivers between vehicles will activate the digital radio Theftlock, XM Theftlock will be displayed.

Callout

Component Name

Preliminary Procedures

Remove the rear widow shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement.
Program the digital radio receiver after replacement. Refer to Control Module References.

Digital Radio Receiver Assembly Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
3 N·m (26 lb in)

Procedure

Disconnect electrical connections.
Transfer parts as required.

Tip
Do not interchange digital radio receivers between vehicles. Interchanging digital receivers between vehicles will activate the digital radio Theftlock, XM Theftlock will be displayed.