GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Malibu 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T45-E 🢒 Floor Shift Control Knob Replacement

Removal Procedure

    Object Number: 2096817 Size: SH
  1. Release the boot (2) from the shift control knob (1) by pulling the boot retainer downward.
  2. Remove the shift knob retaining screw (3).
  3. Remove the shift knob (1) from the shift control.

Installation Procedure

    Object Number: 2096817 Size: SH
  1. Install the shift knob (1) from the shift control.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the shift knob retaining screw (3).

    3. Tighten
    Tighten the screw to 4 N·m (35 lb in).

  3. Install the boot (2) to the console.