For 1990-2009 cars only
Removal Procedure
- Remove the engine oil fill cap and tube.
- If equipped with electric power steering, grasp the cover by the sides and pull up, disengaging the cover from grommets from the ball studs.
- If equipped with hydraulic power steering, grasp the cover by the sides and pull up, disengaging the cover from grommets from the ball studs.
Installation Procedure
- If equipped with hydraulic power steering, place the cover over the ball studs, aligning the cover openings with the power steering reservoir cap and oil fill tube opening.
- Push down on the cover above the studs in order to engage the cover grommets to the studs.
- If equipped with electric power steering, place the cover over the ball studs, aligning the cover opening with the oil fill tube opening.
- Push down on the cover above the studs in order to engage the cover grommets to the studs.
- Install the engine oil fill tube and cap.
