GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Malibu 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T45-E 🢒 Transmission Front Mount Replacement

Removal Procedure

    Caution: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 1229805 Size: SH
  2. Remove the front transaxle mount through bolt.

    3. Object Number: 1229807 Size: SH
  3. Remove the transaxle mount-to-transaxle attachment bolts.
  4. Remove the transaxle mount from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1229807 Size: SH
  1. Install the transaxle mount into the vehicle and tighten the bolts.

    2. Tighten
    Tighten the transaxle mount bolts to 90 N·m (66 lb ft).


    Object Number: 1229805 Size: SH
  2. Install the transaxle mount through bolt.

    3. Tighten
    Tighten the transaxle mount through bolt to 90 N·m (66 lb ft).

  3. Lower the vehicle .