GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Malibu 🢒 Body Systems 🢒 Wipers and Washers 🢒 Washer Pump Replacement

Removal Procedure
  1. Drain the washer solvent from the washer solvent container.
  2. Remove the front fender liner. Refer to Front Fender Liner Replacement.

    3. Object Number: 1207514 Size: SH
  3. Disconnect the washer pump electrical connector.
  4. Disconnect the washer pump hose (2) from the washer pump (5).
  5. Using a small flat-bladed tool, remove the washer pump from the washer solvent container (1).
  6. Using a small flat-bladed tool, remove the washer pump seal (6) from the washer solvent container (1).

Installation Procedure

    Object Number: 1207514 Size: SH
  1. Position the washer pump seal (6) to the washer solvent container (1), pressing in until fully seated.
  2. Position the washer pump (5) to the washer solvent container (1) pressing in until fully seated.
  3. Connect the washer pump electrical connector.
  4. Connect the washer pump hose (2) to the washer pump (5)..
  5. Install the front fender liner. Refer to Front Fender Liner Replacement.
  6. Fill the washer solvent container with washer solvent.
  7. Inspect the washers for proper operation.