GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 37096 Flywheel Holder

Removal Procedure


    Object Number: 309963  Size: SH
  1. Remove the automatic transaxle, if equipped. Refer to Transmission Replacement .
  2. Use the J 37096 to secure the flywheel in order to prevent the crankshaft from rotating.

  3. Object Number: 1526753  Size: SH
  4. Loosen the flywheel bolts.
  5. Remove 5 of the 6 flywheel bolts leaving one bolt at the top of the crankshaft.
  6. Grip the flywheel and remove the remaining bolt. Do not drop the flywheel when removing the final bolt.
  7. Remove the engine flywheel.
  8. Clean the engine flywheel bolt threads and bolt holes.

Installation Procedure


    Object Number: 1526753  Size: SH
  1. Position the flywheel to the crankshaft.
  2. Install the flywheel bolts finger tight.
  3. Use the J 37096 to secure the flywheel in order to prevent the crankshaft from rotating.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Tighten the engine flywheel bolts.
  6. Tighten
    Tighten the bolts to 70 N·m (52 lb ft).

  7. Install the automatic transaxle, if equipped. Refer to Transmission Replacement .