Tools Required

Important: Prevent the crankshaft from rotating clockwise or counterclockwise before using compressed air in the cylinder. Rotation of the crankshaft may cause damage to J 43653 .

1. If equipped with a manual transmission, leave the transmission in first gear with the vehicle on the ground and the parking brake set.
2. If equipped with an automatic transmission, remove the starter. Refer to Starter Motor Replacement .

Important: Use the J 43653 for both manual and automatic transmission vehicles to prevent the rotation of the crankshaft.

3. Install the J 43653 .
4. Remove the camshaft. Refer to Intake Camshaft and Valve Lifter Replacement or Exhaust Camshaft and Valve Lifter Replacement .



5. Remove the camshaft roller followers.



6. Install the J 43649 to the cylinder head.
7. Remove the spark plugs. Refer to Spark Plug Replacement .



8. Install an air hose adaptor into the spark plug hole.
9. Pressurize the cylinder to 690 kPa (100 psi).
10. Compress the valve spring.
11. Remove the valve spring keepers.
12. Remove the valve spring.



13. Using the J 36017 , remove the valve seal.

1. Using the J 36017 , install the valve seal.



2. Install the valve spring.
3. Compress the valve spring.
4. Install the valve spring keepers.
5. Remove the air hose adaptor into the spark plug hole.



6. Remove the J 43649 from the cylinder head.
7. Install the spark plugs. Refer to Spark Plug Replacement .



8. Install the camshaft roller followers.
9. Install the camshaft. Refer to Intake Camshaft and Valve Lifter Replacement or Exhaust Camshaft and Valve Lifter Replacement .
10. If removed, install the starter. Refer to Starter Motor Replacement .
11. If used, remove the J 43653 .