Tools Required

1. Remove the transaxle oil pan. Refer to Oil Pan Replacement .



2. Remove the oil filter. Use a long screwdriver in order to pry the oil filter neck out of the seal.
3. Check the oil filter seal for damage or wear.
4. As needed, remove the seal using the J 6125-1B and the J 23129 .

1. Install a new seal, as needed. Before installing, coat the new seal with a small amount of J 36850 or petroleum jelly.
2. Install a new filter into the case.
3. Install the transaxle oil pan. Refer to Oil Pan Replacement .