Power Steering Fluid Reservoir Outlet Hose Replacement LB7, LLY and LMM

Caution: Refer to Power Steering Hose Disconnected Caution in the Preface section.

1. Siphon the power steering fluid from the reservoir.



2. Disconnect the hose from the pump.



3. Disconnect the hose from the reservoir.
4. Remove the hose from the vehicle.

1. Install the hose to the reservoir.
2. Make sure the clamp is positioned at the end of the hose.

Caution: Refer to Fastener Caution in the Preface section.

3. Tighten the hose clamp.

Tighten
Tighten the clamp to 5 N·m (45 lb in).




4. Install the hose to the power steering pump.
5. Fill the power steering reservoir with fluid. Refer to Checking and Adding Power Steering Fluid.
6. Bleed the power steering system. Refer to Power Steering System Bleeding.

Power Steering Fluid Reservoir Outlet Hose Replacement L18

Caution: Refer to Power Steering Hose Disconnected Caution in the Preface section.

1. Siphon the power steering fluid from the reservoir.



2. Disconnect the hose from the pump.
3. Disconnect the hose from the reservoir.
4. Remove the hose from the vehicle.

1. Install the hose to the power steering pump.
2. Install the hose to the power steering reservoir.

Make sure the clamp is positioned at the end of the hose.

Caution: Refer to Fastener Caution in the Preface section.

3. Tighten the clamp.

Tighten
Tighten the clamp to 5 N·m (45 lb in).

4. Bleed the power steering system. Refer to Power Steering System Bleeding.

Power Steering Fluid Reservoir Outlet Hose Replacement LG4/LG8

Caution: Refer to Power Steering Hose Disconnected Caution in the Preface section.

1. Siphon the power steering fluid from the reservoir.



2. Disconnect the hose from the pump. Refer to Power Steering Hose Quick Connect Fitting Replacement.



3. Disconnect the hose from the reservoir.



4. Disconnect the hose from the engine brackets.
5. Remove the hose from the vehicle.

1. Install the hose to the engine brackets.



2. Install the hose to the power steering reservoir.
3. Make sure the clamp is positioned at the end of the hose.

Caution: Refer to Fastener Caution in the Preface section.

4. Tighten the hose clamp.

Tighten
Tighten the clamp to 5 N·m (45 lb in).




5. Install the hose to the power steering pump.
6. Fill the power steering reservoir with fluid. Refer to Checking and Adding Power Steering Fluid.
7. Bleed the power steering system. Refer to Power Steering System Bleeding.

Power Steering Fluid Reservoir Outlet Hose Replacement LG5/LF6

1. Remove the straps securing the reservoir outlet hose.

Caution: Refer to Power Steering Hose Disconnected Caution in the Preface section.

2. Siphon the power steering fluid from the reservoir.



3. Disconnect the hose from the pump. Refer to Power Steering Hose Quick Connect Fitting Replacement.



4. Disconnect the hose from the reservoir.
5. Remove the hose from the vehicle.

1. Install the hose to the power steering reservoir.

Make sure the clamp is positioned at the end of the hose.

Caution: Refer to Fastener Caution in the Preface section.

2. Tighten the hose clamp.

Tighten
Tighten the clamp to 5 N·m (45 lb in).




3. Install the hose to the power steering pump. Refer to Power Steering Hose Quick Connect Fitting Replacement.



4. Install the straps securing the reservoir outlet hose.
5. Bleed the power steering system. Refer to Power Steering System Bleeding.