| Table 1: | Chime ModuleScan Tool Data Parameters |
| Table 2: | Chime ModuleScan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Chime | __ | Off | The scan tool displays On or Off. This is the state of the chime warning as commanded by the chime module. |
Chime Duration | __ | Varies | The scan tool displays a numeric value. This counts the duartion of the chime module. |
Chime Frequency | __ | High | The scan tools displays High or Low. This is the state of the chime module frequency. |
Chime Type | __ | Off | The scan tool displays Fast/Medium/Medium Slow/Slow/Off. This is the radio chime type as requested by the IPC. |
Ign. Since Current DTC | __ | Varies | The scan tool displays 0 - 50. The chime module counts the number of times the ignition is cycled from the last DTC. |
Indicator Type | __ | Chime | The scan tools displays Beep or Chime. This is the state of the chime module as commanded by the IPC. |
Output Control | Description |
|---|---|
Chime Test | This commands the chime module On or Off. |
