GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Impala 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Ashtray Replacement

Replacement Procedure
  1. Remove the instrument panel (IP) cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

    2. Object Number: 462463 Size: SH
  2. Remove the IP ashtray.
  3. Remove the IP ashtray bracket screws (1).
  4. Remove the IP ashtray bracket.
  5. Disconnect the electrical connector from the ashtray.

Installation Procedure

    Object Number: 462463 Size: SH
  1. Connect the electrical connector to the ashtray.
  2. Install the IP ashtray bracket to the instrument panel.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the IP ashtray bracket screws (1).

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  4. Install the IP ashtray.
  5. Install the IP cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .