For 1990-2009 cars only
- With the brake pedal in the fully released position, ensure that the stop lamp plunger is fully depressed against the brake pedal shanks.
- Fully insert the stop lamp switch and the cruise control switch, if equipped, into the brake pedal bracket.
- Push the brake pedal forward in order to set the brake push rod into the booster.
- Pull the brake pedal to the rear, against the internal stop. This adjusts both the stop lamp switch and the cruise control switch.
- Inspect the stop lamp switch for proper adjustment.
Notice: Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive brake lining wear.
