Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
Schematic Reference: Outside Rearview Mirror Schematics | ||||
1 | Did you review the Power Mirrors Operation and perform the necessary inspections? | -- | Go to Step 2 | |
2 | Verify that the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Connect a test light between the battery positive feed circuit on the switch connector of the outside rearview mirror to a known good ground. Does the test light illuminate? | -- | Go to Step 8 | Go to Step 4 |
4 | Test for an open, a high resistance, or a short to ground in the battery positive feed circuit on the switch of the outside rearview mirror. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 5 |
5 | Inspect for a poor connection in the battery positive feed circuit to the switch of the outside rearview mirror. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 6 |
6 |
Did the test light illuminate for any of the circuits? | -- | Go to Step 7 | Go to Step 11 |
7 |
Did you complete the repair? | -- | Go to Step 12 | -- |
8 | Connect a test light between the battery positive feed and the ground circuit of the switch to the outside rearview mirror. Does the test light illuminate? | -- | Go to Step 10 | Go to Step 9 |
9 | Repair the ground circuit for a high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | -- |
10 | Inspect for poor connections at the switch to the outside rearview mirror. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 12 | Go to Step 11 |
11 |
Did you complete the replacement? | -- | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
