Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform A Diagnostic System Check - Door Systems? | -- | Go to Step 2 | |
2 | Verify that all of the power windows are inoperative. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Inspect the retained accessory power (RAP) circuit breaker. Is the circuit breaker tripped? | -- | Go to Step 12 | Go to Step 4 |
4 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 11 |
5 | Is the vehicle a 2-door vehicle? | -- | Go to Step 8 | Go to Step 6 |
6 |
Does the test lamp light during operation of the switch? | -- | Go to Step 10 | Go to Step 7 |
7 | Replace the left front window switch. Refer to Front Side Door Window Switch Replacement . Is the repair complete? | -- | Go to Step 13 | -- |
8 |
Does the test lamp light during operation of the switch? | -- | Go to Step 10 | Go to Step 9 |
9 | Replace the left front window switch. Refer to Front Side Door Window Switch Replacement . Is the repair complete? | -- | Go to Step 13 | -- |
10 | Repair a poor connection or an open in the power window ground circuit between the left front window switch and G301. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
11 | Repair a poor connection or an open in the power window battery feed circuit between the left IP accessory wiring junction block and the left front window switch connector. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
12 | Repair a short to ground in the power window battery feed circuit or the sun roof module feed circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
