Step | Action | Yes | No |
|---|---|---|---|
1 | Did you perform the Lighting System Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Lighting Systems in Lighting Systems. |
2 |
Are the fog lamps on? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Remove the fog lamp relay. Using a test lamp connected to a known good ground, probe the fog lamp relay switched B+ feed circuit in to the Top Underhood Accessory Wiring Junction Block. Does the test lamp illiminate? | Go to Step 5 | Go to Step 4 |
4 | Repair a poor connection or an open in the fog lamp relay B+ switched B+ feed circuit. Is the repair complete? | Go to Step 8 | -- |
5 | Install a 3A fused jumper across the switched side of the fog lamp relay. Do the fog lamps turn on? | Go to Step 6 | Go to Step 7 |
6 | Replace the fog lamp relay. Is the repair complete? | Go to Step 8 | -- |
7 | Repair a poor connection or an open in the fog lamp switched circuit. Is the repair complete? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Is the repair complete? | Go to Step 2 |
