GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 HHR 🢒 Engine 🢒 Engine Electrical 🢒 Steering Column Trim Cover Replacement

Removal Procedure
  1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
  2. Position the steering column tilt in the full downward position.

    3. Object Number: 1547256 Size: SH
  3. Unsnap and remove the upper steering column trim cover.

    4. Object Number: 1547258 Size: SH
  4. Remove the lower steering column trim cover screws.
  5. Remove the lower steering column trim cover.

Installation Procedure

    Object Number: 1547258 Size: SH
  1. Install the lower steering column trim cover.

    2. Caution: Refer to Fastener Caution in the Preface section.

    Note: Tighten the lower steering column trim cover screws in the mandatory torque sequence shown.

  2. Install the lower steering column trim cover screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 1547256 Size: SH
  3. Install the upper steering column trim cover.
  4. Push on the upper steering column trim cover until it snaps into place and is secure.
  5. Enable the SIR system. Refer to SIR Disabling and Enabling.