Preliminary Procedure

Remove the recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement .

1

Handle, Seat Back Cushion Latch Release

2

Screw, Seat Recliner Finish Cover

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

3

Cover, Seat Recliner Finish Outboard Bottom

Tip
Unclip the rear of the cover first then pull away from the front side of the seat to remove.

4

Screw, Seat Recliner Finish Cover

Tighten
2 N·m (18 lb in)

5

Cover, Seat Recliner Finish Outboard Top

Tip
Unclip the rear of the cover first then pull away from the front side of the seat to remove.