Preliminary Procedure

Remove the rear compartment floor stowage compartment tray. Refer to Rear Floor Trim Plate Replacement .

1

Nut, Rear Seat (Qty: 6)

Tip
Roll the seat forward enough to get access to the nut that attaches the center seat belt assembly to the floor.

Notice: Refer to Fastener Notice in the Preface section.

Tighten
45 N·m (33 lb ft)

2

Bolt, Rear Seat (Qty: 3)

Tip

1. Adjust the seat forward or rearward to access the bolts.
2. Remove the plastic trim pieces to gain access to the nuts.

Tighten
45 N·m (33 lb ft)

3

Rear Seat Assembly