Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the wiper arm assemblies. Refer to Windshield Wiper Arm Replacement .
2. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement .

1

Bolts, Front Window Wiper Motor (Qty: 3)

Tighten
7 N·m (62 lb in)

2

Module, Windshield Wiper System

Tip
Disconnect the wiper motor electrical connector.