Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the console accessory switch mount plate. Refer to Front Floor Console Accessory Switch Mount Plate Replacement .
2. Apply the parking brake.
3. Place the shifter in the Neutral position.

1

Front Floor Console Screws (Qty: 2)

Tighten
2 N·m (18 lb in)

2

Front Floor Console (Console Trim Plate)

Tip
Disconnect the electrical connector.

3

Retainer Clips (Qty: 3)