Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the center console extension. Refer to Front Floor Console Extension Replacement - Center .
2. Remove the console. Refer to Console Replacement .
3. Disconnect the shift control cables. Refer to Floor Shift Control Cable Replacement (Automatic Transmission) or Shift Cable Replacement (Manual Transmission).
4. Remove the body control module. Refer to Body Control Module Replacement .

1

Instrument Panel Center Support Bracket Screws (Qty: 4)

Tighten
2 N·m (18 lb in)

2

Instrument Panel Center Support Bracket Bolts (Qty: 3)

Tighten
25 N·m (18 lb ft)

3

Instrument Panel Center Support Bracket Assembly

Tip
Remove the shift control assembly from the instrument panel center support bracket.