Thermostat Housing Crossover Replacement LLY/LBZ

1. Remove the radiator fan. Refer to Fan Replacement .
2. Remove the drive belt tensioner and generator bracket. Refer to Generator Bracket Replacement .
3. Remove the air conditioning (A/C) and power steering bracket. Refer to Air Conditioning (A/C) Compressor and Power Steering Pump Bracket Replacement .



4. Remove the fuel line bolt and position the fuel line aside.



5. Compress the clamp and disconnect the turbocharger inlet cooling hose/pipe.



6. Remove the oil fill tube bolts and the oil fill tube.
7. Disconnect the coolant temperature sensor electrical connector.
8. Remove the exhaust gas recirculation (EGR) coolant pipe. Refer to Exhaust Gas Recirculation Coolant Hoses/Pipes Replacement .



9. Remove the fuel pipe bracket bolt.
10. Disconnect the hose at the thermostat bypass pipe.
11. Disconnect the radiator inlet hose from the thermostat housing.
12. Remove the thermostat bypass bolts at the water pump.



13. Remove the 8 thermostat housing crossover bolts.
14. Remove the thermostat housing crossover.

1. Position the thermostat housing crossover.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the 8 thermostat housing crossover bolts.

Tighten
Tighten the thermostat housing crossover bolts to 25 N·m (18 lb ft).

3. Install the thermostat bypass bolts to the water pump.

Tighten
Tighten to 21 N·m (16 lb ft).

4. Install the radiator inlet hose to the thermostat housing.
5. Connect the hose to the thermostat bypass pipe.



6. Install the fuel pipe bracket bolt.

Tighten
Tighten the fuel pipe bracket bolt to 25 N·m (18 lb ft).

7. Install the EGR coolant pipe. Refer to Exhaust Gas Recirculation Coolant Hoses/Pipes Replacement .
8. Connect the coolant temperature sensor electrical connector.



9. Install the oil fill tube bolts and the oil fill tube.

Tighten
Tighten the oil fill tube bolts to 25 N·m (18 lb ft).




10. Compress the clamp and connect the turbocharger inlet cooling hose/pipe.



11. Position the fuel line and install the fuel line bolt.
12. Install the A/C and power steering bracket. Refer to Air Conditioning (A/C) Compressor and Power Steering Pump Bracket Replacement .
13. Install the drive belt tensioner and generator bracket. Refer to Generator Bracket Replacement .
14. Instal the radiator fan. Refer to Fan Replacement .