Indicators
Symbol | Reference |
|---|---|
| |
| Air Bag: SIR System Description and Operation |
(Canada) 
BRAKE (U.S.) | |
| |
(Canada) CRUISE (U.S.) | |
| Fasten Safety Belt: Seat Belt System Description and Operation |
| High Beam: Exterior Lighting Systems Description and Operation |
| Lights On: Exterior Lighting Systems Description and Operation |
| The IPC illuminates this indicator i when the engine control module (ECM) detects a low oil pressure condition. The IPC receives a serial data message from the ECM requesting illumination. |
LOW FUEL | The IPC illuminates this indicator when the IPC detects that the fuel level is less than a pre-determined value. The IPC receives a serial data message from the engine control module (ECM) indicating fuel level percent. |
(Canada) SECURITY (U.S.) | SECURITY: Immobilizer Description and Operation |
(Canada) SERVICE ENGINE SOON (U.S.) | Malfunction Indicator Lamp (MIL): Engine Control Module Description for the 4.3L engine or Engine Control Module Description for the 4.8L, 5.3L, 6.0L, 6.2L or 7.0L engine or Engine Control Module Description for the 6.6L engine |
| Tire Pressure Monitor: Tire Pressure Monitor Description and Operation |
| TOW/HAUL: Transmission Component and System Description for the 4L80-E/4L85-E transmission or Transmission Component and System Description for the 4L60-E/4L65-E/4L70-E transmission |
| Turn Signals: Exterior Lighting Systems Description and Operation |
| |
| Wait to Start: Glow Plug System Description for the 6.6L engine |
DIC Warning Messages
Message | Reference |
|---|---|
AUTOMATIC LIGHT CONTROL OFF | |
AUTOMATIC LIGHT CONTROL ON | |
BUCKLE PASSENGER SEATBELT | |
BUCKLE SEATBELT | |
CALIBRATING: DRIVE IN CIRCLES | |
CALIBRATION COMPLETE | |
CARGO DOOR OPEN | |
CHANGE ENGINE OIL SOON | The IPC illuminates this message when the ECM determines that the engine oil should be changed. Once the oil is changed, perform the engine oil monitor reset procedure in order to clear the Change Engine Oil indicator. Refer to GM Oil Life System Resetting |
CHANGE FUEL FILTER | |
CHECK LEFT FRONT TIRE PRESSURE | |
CHECK LEFT REAR TIRE PRESSURE | |
CHECK RIGHT FRONT TIRE PRESSURE | |
CHECK RIGHT REAR TIRE PRESSURE | |
CLEAN EXHAUST FILTER | |
COOLANT LEVEL LOW ADD COOLANT | |
DRIVER DOOR OPEN | |
ELEVATED IDLE OFF | |
ELEVATED IDLE ON | |
ENGINE HOT TURN A/C OFF | |
ENGINE POWER IS REDUCED | Engine Control Module Description for the 4.3L engine or Engine Control Module Description for the 4.8L, 5.3L, 6.0L, 6.2L or 7.0L engine or Engine Control Module Description for the 6.6L engine |
ENGINE OIL LOW ADD OIL | The IPC displays this message in the DIC when the ECM detects a low engine oil level condition. |
ENGINE OVERHEATED IDLE ENGINE | |
ENGINE OVERHEATED STOP ENGINE | |
FAST IDLE ACTIVE | |
FUEL LEVEL LOW | The IPC displays this message in the DIC and the when the IPC detects that the fuel level is less than a pre-determined value based on fuel information from the ECM. |
ICE POSSIBLE DRIVE WITH CARE | The IPC displays this message in the DIC when the outside air temperature drops below 4°C (39°F). |
LEFT REAR DOOR OPEN | |
OIL PRESSURE LOW STOP ENGINE | The IPC displays this message in the DIC when the ECM detects a low oil pressure condition. |
PASSENGER DOOR OPEN | |
PROGRAM CLUSTER | The IPC displays this message in the DIC when the IPC needs to be programmed. Refer to Instrument Cluster Programming and Setup |
REMOTE KEY LEARNING ACTIVE | |
REMOTE KEY LEARNING COMPLETE | |
REPLACE BATTERY IN REMOTE KEY | |
RIGHT REAR DOOR OPEN | |
SERVICE A/C SYSTEM | |
SERVICE AIR BAG | |
SERVICE BATTERY CHARGING SYSTEM | |
SERVICE STABILITRAK | |
SERVICE THEFT DETERRENT SYSTEM | |
SERVICE TIRE MONITOR SYSTEM | |
SERVICE TRANSMISSION | Transmission Component and System Description for the 4L80-E/4L85-E transmission or Transmission Component and System Description for the 4L60-E/4L65-E/4L70-E transmission |
SERVICE VEHICLE SOON | The IPC displays this message in the DIC when certain malfunctions that are not related to the emissions system is detected by the ECM ot the BCM. |
SPEED LIMITED TO XXX | The IPC displays the SPEED LIMITED TO XXX in the driver information (DIC). The limited speed value is determined by the engine control module (ECM). |
STABILITRAK NOT READY | |
STABILITRAK OFF | |
STARTING DISABLED SERVICE THROTTLE | |
THEFT ATTEMPTED | |
TIGHTEN GAS CAP | |
TIRE LEARNING ACTIVE | |
TRANSMISSION HOT IDLE ENGINE | Transmission Component and System Description for the 4L80-E/4L85-E transmission or Transmission Component and System Description for the 4L60-E/4L65-E/4L70-E transmission |
TURN SIGNAL ON | |
VEHICLE OVERSPEED | The IPC displays this message when the IPC detects that the vehicle speed is more than 120 km/h (75 mph). |
WATER IN FUEL SERVICE REQUIRED | |
WAIT TO START |
