Preliminary Procedures

1. Remove both drivers and passenger knee bolsters. Refer to Passenger Knee Bolster Replacement and Driver Knee Bolster Replacement .
2. Remove the cluster trim plate assembly. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

1

Instrument Panel Cluster Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Instrument Panel Cluster Assembly

Procedure

1. Disconnect the electrical connections.
2. Refer to Control Module References for programming and set up procedures.