Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the thermostat housing crossover replacement. Refer to Thermostat Housing Crossover Replacement .

1

Thermostat Bypass Pipe Bolt (Qty: 2)

Tighten
21 N·m (16 lb ft)

2

Thermostat Bypass Pipe to Turbocharger Outlet Cooler Pipe Clamp

3

Thermostat Bypass Pipe

Tip
Install new O-ring seals. Lubricate using clean engine coolant.