GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Express - AWD 🢒 Engine 🢒 Engine Cooling 🢒 Coolant Recovery Reservoir Replacement

Removal Procedure
  1. Partially drain the coolant. Refer to Cooling System Draining and Filling .
  2. Disconnect the hose from the coolant recovery reservoir.
  3. Remove the coolant recovery reservoir retaining screws.
  4. Remove the coolant recovery reservoir.

Installation Procedure
  1. Install the coolant recovery reservoir.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the coolant recovery reservoir retaining screws.

    3. Tighten
    Tighten the screws to 6 N·m (53 lb in).

  3. Connect the hose to the coolant recovery reservoir.
  4. Add coolant to reservoir. Refer to Cooling System Draining and Filling .