GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Express - AWD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Back Cushion Replacement

Removal Procedure
  1. Remove the rear seat from the vehicle. Refer to Rear Bench Seat Replacement .
  2. Remove the seat back cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement .
  3. Remove the 2 bolts at the outer seat riser from the seat back frame.

    4. Object Number: 502203 Size: SH

    Important: Note the position and the length of the bolts removed. This will assist with reassembly.

  4. Remove the right and left bolts that retain the seat back frame to the seat back hinges.

    5. Object Number: 502122 Size: SH
  5. Remove the seat back frame.

Installation Procedure

    Object Number: 502122 Size: SH
  1. Install the seat back frame.

    2. Object Number: 502203 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts that retain the seat back frame to the seat back hinges in the locations noted during disassembly.

    3. Tighten
    Tighten the bolts to 30 N·m (22 lb ft).

  3. Install the 2 bolts at the outer seat riser from the seat back frame.

    4. Tighten
    Tighten the bolts to 30 N·m (22 lb ft).

  4. Install the seat back cover and pad. Refer to Rear Seat Cushion Cover and Pad Replacement .
  5. Install the rear seat in the vehicle. Refer to Rear Bench Seat Replacement .