GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Express - AWD 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure
  1. Remove the left trim panel. Refer to Body Hinge Pillar Trim Panel Replacement .

    2. Object Number: 1198943 Size: SH
  2. Remove the electrical connector.
  3. Remove the screw from the switch.
  4. Remove the indicator switch from the vehicle.

Installation Procedure

    Object Number: 1198943 Size: SH
  1. Connect the indicator switch to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screw to the switch.

    3. Tighten
    Tighten the indicator switch retaining screw to 4 N·m (35 lb in).

  3. Install the electrical connector.
  4. Install the left trim panel. Refer to Body Hinge Pillar Trim Panel Replacement .