GM Service Manual Online
For 1990-2009 cars only

Engine Coolant Fan Lower Shroud Replacement 4.3L, 4.8L, 5.3L, 6.0L

Removal Procedure

  1. Remove the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement for the 4.8L, 5.3L, 6.0L engines or Air Cleaner Assembly Replacement for the 4.3L engine.

  3. Object Number: 834218  Size: SH
  4. Remove the fan shroud bolts (1,3,4).
  5. Remove the fan shroud (2,5).

Installation Procedure


    Object Number: 834218  Size: SH
  1. Install the fan shroud (2,5).
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the fan shroud bolts (1,3,4).
  4. Tighten
    Tighten the bolts to 6 N·m (53 lb in).

  5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement for the 4.8L, 5.3L, 6.0L engines or Air Cleaner Assembly Replacement for the 4.3L engine.
  6. Install the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement .